WeChat: wxid_x7baevs0ah7222 https://scholar.google.com.ua. |
Name: |
MYKHAILOM. HUK |
Date of Birth: |
14November 1959 |
Position: |
Professordep. Marine technologies and oceaneering,Admiral Makarov National University of Shipbuilding, PhD |
Address: |
9, Heroiv Ukrainy Avenue, Admiral Makarov National University of Shipbuilding, Mykolaiv, Ukraine, 54025 |
Telephone: |
+380671288458 |
Email: |
mykhailo.guk@nuos.edu.ua |
Nationality: |
Ukrainian |
Languages: |
Russian(native), Ukrainian, English |
Education: |
Ph.D. in Naval Architecture and ship structure, Mykolayiv Shipbuilding Institute named after admiral S.Y. Makarov, 1990. Shipbuilding and ship repair, Mykolayiv Shipbuilding Institute named after admiral S.Y. Makarov, March 1983. |
ContinuingEducation: |
Aspirantura (Doctoral studies), Mykolayiv Shipbuilding Institute named after admiral S.Y. Makarov,1983–1986. |
Honours: |
Diploma with Honours, Mykolayiv Shipbuilding Institute, professional qualification “- Shipbuilding and ship repair engineer”, 1977–1983. |
WorkExperience: |
Ukrainian State science-research Institute of standardization and certification in the Shipbuilding,junior research assistant, 02/06/1986–31/05/1989. Ukrainian State science-research Institute of standardization and certification in the Shipbuilding, constructor engineer, 01/06/1989–30/09/1994. Ukrainian State science-research Institute of standardization and certification in the Shipbuilding, senior project constructor engineer, 01/10/1994–27/12/1999. Ukrainian State Maritime Technical University named after admiral Makarov, Marine technology department, Senior lecturer, 01/09/2001–24/03/2004. Admiral Makarov National University of Shipbuilding, Marine technology department, Senior lecturer, 25/03/2004–31/08/2019. Admiral Makarov National University of Shipbuilding, Marine technology and oceaneering department, Senior lecturer, 01/09/2019 – present. |
Teaching Experience: |
The main activity is teaching. Since 01/09/2001 and till now I delivered lectures and conducted laboratory and practical training in the following subjects: “Ocean science”, “Science-research Ship Design”, “Computer Aided Technologies in Oceaneering”, “Flexible Constructions in Oceaneerig”, “Introduction to Naval Architecture”, “General Naval Architecture and Oeaneering Facilities”“History of Shipbuilding and Exploration of the Oceans”, “Methods of Automated Project Analysis of Oceaneering”, “Oceaneering”, "Basic of Shipbuilding", "Design and Construction of Underwater Vehicle", "Transportation of Dangerous Cargoes", "Underwater Robot and Manipulators", "Remote Control SystemsDesigning", "Computer-aided Design of ShipGear'sSupport Structures", "Design of Steering Gears and Ship Hoisting and Transport Mechanisms", "Mechanisms of Specialized Vessel Systems", "Feasibility Study of Design Solutions", "Propulsion Quality and Controllability of Underwater Vehicle", "General Ship Mechanisms and Systems", "Ship Design Gear and Systems using Modern Software". I was the head of the course and diploma projects. Under my leadership 32 students successfully defended their diploma projects. |
Research Interests |
Кey research area is wind turbine installation vessel (WTIV), drillship design methodologies. Application of modern computer aided design (i.e. AUTOCAD, Solid Works) programs in ship gear design and simulation. |
PUBLICATIONS |
Author and co-author of over 10 scientific papers, 3 manuals, The list of the most important publications is listed below: |
Book |
1. |
GukM.M.Flexible ship and oceaneering constructions. – Mykolaiv: Admiral Makarov National University of Shipbuilding, 2009 – 92 p. |
Articles in Collection of scientific papers |
1. |
Guk M.M. Drill ships development and changing their main elements [Text] / M.M.Guk // Collection of scientific papers National University of Shipbuilding.- Mykolayiv: NUOS, 2015.-№2.- pp. 23-26.ISSN 2311-3405 (Print), ISSN 2313-0415 (Online). |
2. |
Guk M.M. Analysis of the formulas for calculating the drill ship's lightweight[Text] / M.M.Guk // Collection of scientific papers National University of Shipbuilding.- Mykolayiv: NUOS, 2017.-№4.- pp. 14-18. |
Publications in Proceedings of Conferences with full paper review |
1. |
Guk M.M. Change of the main elements of drilling vessels during their generations development//Deepwater engineering and technology: Proceedings of the All Ukrainian Scientific and Technical Conference with International Participation, Mykolaiv, 2014. |
2. |
GukM.M. Determination of the main elements of a drilling vessel based on analysis of statistical data// Advanced technologies of design, construction, operation and repair of ships, marine technical facilities and engineering structures: Proceedings of the All Ukrainian Scientific and Technical Conference with International Participation, Mykolaiv, 2015. |
3. |
GukM.M. Analysis of formulas for calculating light weght of drilling vessels// Advanced technologies of design, construction, operation and repair of ships, marine technical facilities and engineering structures: Proceedings of the All Ukrainian Scientific and Technical Conference with International Participation, Mykolaiv, 2016. |
4. |
Guk M.M. Determination of the deadweight of a drilling vessel based on the analysis of statistical data // Innovations in Shipbuilding and Ocean Engineering: Proceedings of the VI International Scientific and Technical Conference, Mykolaiv, 2016. |
5. |
Guk M.M. Features of the operational tasks of drilling vessels and possible emergency situations during their operation// // Advanced technologies of design, construction, operation and repair of ships, marine technical facilities and engineering structures: Proceedings of the All Ukrainian Scientific and Technical Conference with International Participation, Mykolaiv, 2017. |
6. |
Guk M.M. Verification of formulas recommended for determining the weight load of a drilling vessel// Advanced technologies of design, construction, operation and repair of ships, marine technical facilities and engineering structures: Proceedings of the All Ukrainian Scientific and Technical Conference with International Participation, Mykolaiv, 2017. |
7. |
Guk M.M. Features of design elements of ships for installing wind turbines//Innovations in Shipbuilding and Ocean Engineering: Proceedings of the VII International Scientific and Technical Conference, Mykolaiv, 2017. |
8. |
Guk M.M. Analysis of wind turbine installation technologies and operational tasks of a transport mounting vessel// Advanced technologies of design, construction, operation and repair of ships, marine technical facilities and engineering structures: Proceedings of the All Ukrainian Scientific and Technical Conference with International Participation, Mykolaiv, 2018. |
Participation in Research Projects: |
01/09/1980 – 31/05/1981 |
"Research of the ship principal dimensions influenceto the stability polar chart of transport ships" |
01/01/1984– 25/12/1985 |
"Development of theoretical bases of rubberized-cord tractive shells designing for fishing industry " |
01/01/1987 – 31/12/1990 |
"Experimental investigation of the hydro cylinder's seals working life" |
01/09/2001 – 25/12/2001 |
"Development of stat regressions for diving bells designing " |
01/11/2006 – 30/04/2007 |
"Damped capacity determination for cast off hook during tow rope release " |
01/01/2010 – 30/04/2010 |
"Analysis of the some questions of dynamic stability anchor handling vessels" |
01/01/2012 – 30/04/2012 |
"Determination of dynamicforce in additional rope during change in position of the drilling rig anchor" |
01/01/2013 – 30/04/2013 |
"Investigation of technical equipment for drilling rig anchoring" |
01/05/2013 – 30/06/2013 |
"Investigation of the weather constrain for semisubmersible rig designing for Black Sea area" |
01/09/2013 – 30/06/2014 |
"Development of stat regressions for drillship principal dimensions determinationon the initial stages of designing" |
01/09/2015 – 30/04/2016 |
"Development of method of determination drillship light weight on the initial design stages" |
01/05/2016 – 30/06/2016 |
"Development of method of determination drillship dead weight stat regression using" |
01/09/2016 – 25/12/2016 |
"Investigation of drillship weight groups functions by their verification real data |
01/01/2017 – 28/02/2017 |
"Investigation of the operational tasks of drilling vessels and possible emergency situations during their operation " |
01/01/2018 – 28/02/2018 |
"Analysis of wind turbine installation technologies and operational tasks of a transport mounting vessel" |
01/01/2019 – 25/04/2019 |
"Analysis the strain-stress state of the rudder blade using SolidWorks and mass of it reducing" |
微信号：wxid_x7baevs0ah7222 https://scholar.google.com.ua. |
姓名： |
MYKHAILOM. HUK |
出生日期： |
1959年11月14日 |
职位： |
马卡洛夫国立造船大学海洋技术和海洋工程系教授，博士 |
住址： |
乌克兰梅克莱夫市乌克兰英雄大道9号马卡洛夫国立造船大学，邮编54025 |
电话： |
+380 671288458 |
电子邮箱： |
mykhailo.guk@nuos.edu.ua |
国籍： |
乌克兰 |
语言： |
俄语（母语）、乌克兰语、英语 |
学历： |
1990年，梅克莱夫市造船学院（以海军上将马卡洛夫命名）造船工程和船舶结构博士。 1983年3月，梅克莱夫市造船学院（以海军上将马卡洛夫命名）造船和船舶修理。 |
继续教育： |
1983年至1986年，梅克莱夫市造船学院（以海军上将马卡洛夫命名）副博士学位（博士学习）。 |
荣誉： |
1977年至1983年，梅克莱夫市造船学院荣誉证书，“造船和船舶修理工程师”专业资格。 |
工作经历： |
1986年6月2日至1989年5月31日，乌克兰国家造船标准化和认证科学研究院初级研究助理。 1989年6月1日至1994年9月30日，乌克兰国家造船标准化和认证科学研究院建造工程师。 1994年10月1日至1999年12月27日，乌克兰国家造船标准化和认证科学研究院高级项目建造工程师。 2001年9月1日至2004年3月24日，乌克兰国立海洋技术大学（以海军上将马卡洛夫命名）海洋技术系高级讲师。 2004年3月25日至2019年8月31日，马卡洛夫国立造船大学海洋技术系高级讲师。 2019年9月1日至今，马卡洛夫国立造船大学海洋技术与海洋工程系高级讲师。 |
教学经验： |
主要从事教学活动。自2001年9月1日至今，针对“海洋科学”、“船舶设计科学研究”、“海洋工程计算机辅助技术”、“海洋工程柔性结构”、“海军建筑概论”、“一般海洋建筑和海洋工程设施”“造船和海洋探测历史”，“海洋工程自动化项目分析方法”，“海洋工程”，“造船基础”，“水下航行器设计和建造”，“危险货物运输”，“水下机器人和机械手”，“遥控系统设计”、“船舶装置支承结构计算机辅助设计”、“转向装置及船舶起重运输机构设计”、“专用船舶系统机构设计”、“设计方案可行性研究”、“水下航行器推进质量与可控性”，“通用船舶机械和系统”，“使用现代软件的船舶设计齿轮和系统”学科进行了教学、实验室和实践培训。担任课程和毕业设计负责人。在我的领导下，32名学生成功地完成了毕业论文答辩。 |
研究方向 |
关键研究领域包括风力机安装船（WTIV）、钻井船的设计方法、现代计算机辅助设计（AUTOCAD、Solid Works）程序在船舶装置设计与仿真中的应用。 |
发表论文 |
编写和合著了大约10篇科技论文，3本手册。其中一些最重要的文章所列如下： |
专著 |
1. |
Guk M.M. Flexible ship and oceaneering constructions. – Mykolaiv： Admiral Makarov National University of Shipbuilding, 2009 – 92 p. |
科技论文集收录文章 |
1. |
Guk M.M. Drill ships development and changing their main elements [Text] / M.M.Guk // Collection of scientific papers National University of Shipbuilding.- Mykolayiv： NUOS, 2015.-№2.- pp. 23-26. ISSN 2311-3405 (Print), ISSN 2313-0415 (Online). |
2. |
Guk M.M. Analysis of the formulas for calculating the drill ship's lightweight [Text] / M.M.Guk // Collection of scientific papers National University of Shipbuilding.- Mykolayiv： NUOS, 2017.-№4.- pp. 14-18. |
会议记录全文审查论文 |
1. |
Guk M.M. Change of the main elements of drilling vessels during their generations development// Deepwater engineering and technology： Proceedings of the All Ukrainian Scientific and Technical Conference with International Participation, Mykolaiv, 2014. |
2. |
Guk M.M. Determination of the main elements of a drilling vessel based on analysis of statistical data// Advanced technologies of design, construction, operation and repair of ships, marine technical facilities and engineering structures： Proceedings of the All Ukrainian Scientific and Technical Conference with International Participation, Mykolaiv, 2015. |
3. |
Guk M.M. Analysis of formulas for calculating light weght of drilling vessels// Advanced technologies of design, construction, operation and repair of ships, marine technical facilities and engineering structures： Proceedings of the All Ukrainian Scientific and Technical Conference with International Participation, Mykolaiv, 2016. |
4. |
Guk M.M. Determination of the deadweight of a drilling vessel based on the analysis of statistical data // Innovations in Shipbuilding and Ocean Engineering： Proceedings of the VI International Scientific and Technical Conference, Mykolaiv, 2016. |
5. |
Guk M.M. Features of the operational tasks of drilling vessels and possible emergency situations during their operation// // Advanced technologies of design, construction, operation and repair of ships, marine technical facilities and engineering structures： Proceedings of the All Ukrainian Scientific and Technical Conference with International Participation, Mykolaiv, 2017. |
6. |
Guk M.M. Verification of formulas recommended for determining the weight load of a drilling vessel// Advanced technologies of design, construction, operation and repair of ships, marine technical facilities and engineering structures： Proceedings of the All Ukrainian Scientific and Technical Conference with International Participation, Mykolaiv, 2017. |
7. |
Guk M.M. Features of design elements of ships for installing wind turbines// Innovations in Shipbuilding and Ocean Engineering： Proceedings of the VII International Scientific and Technical Conference, Mykolaiv, 2017. |
8. |
Guk M.M. Analysis of wind turbine installation technologies and operational tasks of a transport mounting vessel// Advanced technologies of design, construction, operation and repair of ships, marine technical facilities and engineering structures： Proceedings of the All Ukrainian Scientific and Technical Conference with International Participation, Mykolaiv, 2018. |
参与的研究项目： |
01/09/1980 –31/05/1981 |
“船舶主要尺寸对运输船舶稳性极坐标图影响的研究” |
01/01/1984– 5/12/1985 |
“渔业用橡胶帘线牵引船壳体设计理论基础的发展” |
01/01/1987 –31/12/1990 |
“液压缸密封件使用寿命的试验研究” |
01/09/2001 –25/12/2001 |
“潜水钟设计统计回归的发展” |
01/11/2006 –30/04/2007 |
“牵引绳释放过程中脱钩阻尼能力的测定” |
01/01/2010 –30/04/2010 |
“动力稳定抛锚船若干问题分析” |
01/01/2012 –30/04/2012 |
“钻机锚定位置变化时附加绳索动力的测定” |
01/01/2013 –30/04/2013 |
“钻机锚固技术设备研究” |
01/05/2013 –30/06/2013 |
“黑海地区半潜式钻机设计的天气约束研究” |
01/09/2013 –30/06/2014 |
“设计初期钻井船主要尺寸测定的统计回归发展” |
01/09/2015 –30/04/2016 |
“初步设计阶段确定钻井船空载排水量方法的发展” |
01/05/2016 –30/06/2016 |
“钻井船自重统计回归测定方法的发展” |
01/09/2016 –25/12/2016 |
“通过验证真实数据研究钻井船重量组函数” |
01/01/2017 –28/02/2017 |
“钻井船作业任务及作业中可能出现的紧急情况调查” |
01/01/2018 –28/02/2018 |
“运输安装船的风力涡轮机安装技术和操作任务分析” |
01/01/2019 –25/04/2019 |
“用SolidWorks分析舵叶的应变应力状态并减小其质量” |
|
|
|
|
